Description
Bought for a job never used.
Break Tank & Pump MIDI-3A AB 230 V
Wall mounted break tank and pump assembly with Fluid Category 5 protection by virtue of the integral Type AB air gap complying with BS EN13077: 2003. The set is intended for light industrial use and is housed in a stainless steel cabinet ready for wall mounting in a frost free environment. The primary purpose is to provide backflow protection in accordance with the new Water Regulations. The Midi-Break® also provides cold water at a known outlet pressure. The unit is quiet since the pump is mounted on anti-vibration mounts with flexible stainless braided internal hoses. Automatic pump control is by means of a pressure vessel, industrial pressure switch and a flow sensor. This system provides reliable pump operation with the minimal amount of starts. The pump has a soft start feature, which avoids water and electrical surges. The pump is protected via low level float switch in the cistern.
Product Code: BTMIDI-3A.
Additional Information
Fluid Category 5 / Booster Pumps - Max. Flow Rate 0.28 Lt/s
Fluid Category 5 / Booster Pumps - Outlet Pressure 1.5 bar
Fluid Category 5 / Booster Pumps - Inlet Size 15 mm
Fluid Category 5 / Booster Pumps - Outlet Size 15 mm
Fluid Category 5 / Booster Pumps - Voltage 230 V
Fluid Category 5 / Booster Pumps - Number of Pumps Single
Fluid Category 5 / Booster Pumps - Cistern Size 3.5 Litres
Fluid Category 5 / Booster Pumps - Powered Yes
Application
Waste bin washing - use Midi-3A single tap only; Hose union tap - non-domestic - use Midi-3A single tap; Wash-down - animals or any FC 5 - see ?Boost-A-Break?; Sinks with hoses; Bidets - ascending spray - see Ablution Plant - BTHW; Vegetable washing; Butchery & meat equipment / Slaughterhouse; Laboratories; Clothes & Dish washing machines - healthcare premises; Instantaneous showers and heaters - care premises; Applications deemed to be Category 5 by water company.